Donating the way of digital

Today world is a computarized era so most of the persons have computers intheir home or working place. Most of the people have general knowledge about computers. Nowadays world total computers are may be more than 4million. Most of the computer users don't use maximum volume of their computer resources like Harddisk space, RAM.... That means there must be a reamaining harddisk space left in every computer. But if we can use those left hard drive space and we can create a massive network that can defeat the performance of a super computer too.

Yes guys, it can be happen. Now institute of systems biology company located in seattle in america has been started that sa a project. That is called WCG world community Grid. World wide 4000 computers remaining volume is used to create this computer grid. The main purpose of this project is to do researchs on processes of different kinds of protiens. The objective of this project is to find out protiens that can be use as drugs to cure to diseases like Dengue, Hepatitis C, West Nile, Yellow Fever virus, HIV Aids, Cancers.

Finding properties of a protien using a normal way it takes lots of days to complete only one protien. It may be life time of a scientist. That is because using only one computer but not with this Computer Grid. We may be spend 20,000 years to do work in normal way that WCG done in one year.

This system gives us a chance to give our computer free space to human multitude height of eminence. WCG company offers us a free software. After we install that this software connect to the WCG by the most secure way. In that point you don't worry about the your computer protection coz this software is trusted. WCG company sends you the problems that have to be solve to recognize the properties of protiens, but this software best feature is user don't feel anything happening. So lets conribute this non-profit thing and help to find out the drugs.

www.worldcommunitygrid.org

8 People Can Use The Same Msn Dial Up Account

its easy really and cute work.Do you need to use one dial-up connection or same dial-up connection for your entire family with just only one bill??? If it can it will be a little saving on ur monthly expenses. but you know what Guyz it can be happen. So you really want to know how to do it, Then this is the way!!!

Step One : Purchase 20 dollar a month subscription to MSN unlimited access dial up. This will include an MSN 9 cd which you will need. With the software installed, fill up your secondary account slots with new users. Make sure you pick @msn if it gives you the choice, hotmail email addresses will not work..

say the secondary account is Shyam@msn.com type in the Dial up connection

USER : MSN/shyam
PASS: ******* (whatever)

connect to your local msn phone number and the other people you gave secondary accounts to will be able to do the same, while you are connected. Its a sweet deal considering everyone is paying about 2 bucks a month for internet access, especially if you cannot get broadband. if you wanted to sell off the access to people you could actually make money doing this.. but i do not suggest it.

I used to be an msn tech and this was a little known secret even to most of the employees.

After you do this you do not need the software any more. I would suggest keeping it on to micromanage everyone else's accounts. and for the simple fact that if they don't pitch in, cut them off HEHEHE

i'm on ADSL Broadband now so i dont care if i tell you my little secret. anyone else knew of this?

Creating A Huge File Without Nothing

Create A Huge File

You can create a file of any size using nothing more than what's supplied with Windows. Start by converting the desired file size into hexadecimal notation. You can use the Windows Calculator in Scientific mode do to this. Suppose you want a file of 1 million bytes. Enter 1000000 in the calculator and click on the Hex option to convert it (1 million in hex is F4240.) Pad the result with zeroes at the left until the file size reaches eight digits—000F4240.

Now open a command prompt window. In Windows 95, 98, or Me, you can do this by entering COMMAND in the Start menu's Run dialog; in Windows NT 4.0, 2000, or XP enter CMD instead. Enter the command DEBUG BIGFILE.DAT and ignore the File not found message. Type RCX and press Enter. Debug will display a colon prompt. Enter the last four digits of the hexadecimal number you calculated (4240, in our example). Type RBX and press Enter, then enter the first four digits of the hexadecimal size (000F, in our example). Enter W for Write and Q for Quit. You've just created a 1-million-byte file using Debug. Of course you can create a file of any desired size using the same technique.

Preparing For Exams

1.YOUR STUDY SPACE

Get your desk in order! It really helps when you have one particular place to study, a clear desk, and all your books and notes near you, divided into subjects. Make things as comfortable as you can. Have pens and pencils at hand. Supply yourself with lots of blank pages for making notes..

2.A STUDY PLAN

Make a study plan. This will help you focus on what you have to do each day.
In your study plan, write a list of all your subjects, and give equal time to each. Fill in the times to be spent on each subject between now and the exam. At the end of each day, tick off what you have achieved, and have a look at what you will do the following day.

3.MAKE NOTES & DIAGRAMS

As you revise, highlight important points in your textbook, and take notes. There is no need to write lengthy notes. Use bullet points, spider diagrams, sketch maps, key word summaries, anything that will help you remember the information.

You can test yourself the following morning by glancing through these notes and then writing from memory a few points on the main topics. Every time you do this, you get better at remembering the material and your notes get shorter, so revision gets faster.


4.USE PREVIOUS EXAM PAPERS

Go back to previous examination papers, especially to the short-answer questions.
Read the questions carefully. Follow the instructions. Check the time allowed for answers. Write your answers neatly. Write the correct number for each answer. This is great practice for the exam, and remember also that questions tend to be repeated!

5.TAKE A BREAK!

Pace yourself! It is a mistake to cram at this point.
Give yourself time off to relax. It is better to study in short bursts and then take a break. That way, you won't be too tired and you'll actually be able to think!


6.BALANCE YOUR TIME

It is terribly important to relax. You need to get good sleep, eat properly, exercise and take time out with your friends. They're in the same boat, and the mutual support will go a long way to helping you keep a good balance.

7.BE CONFIDENT

Be confident! Remember the examiners want you to succeed. They've been there themselves.


8.EXAM TIME

As exam time approaches, and tension rises, it's sometimes hard to concentrate, because you're thinking of all you have to do! Don't worry, keep cool and try to remember the following overall points.

9.KEEP COOL

Now is the time to keep a cool head while you spend some time revising for the subject of the following day. Go back to your revision notes, diagrams, definitions, but do not cram. It is terribly important to have a relaxed mind.

10.ORGANISE YOURSELF

Collect your equipment, e.g. pencils, pens, eraser, ruler. Check out your exam timetable and have everything ready for the morning so that you're not rushed.

11.BE PREPARED

Get a good night's sleep. In that way, you will be refreshed in the morning, ready to be at the exam in good time and in good shape. Keep calm, and remember that there is a life after exams!

5 Steps For Exam Success

Do this simple steps get your maximum success

1. Read through the entire examination paper first. Start with whatever question you are most comfortable with.


2. Show all the steps that you take to get to your final answer. This will ensure that you should receive all the marks available for the question.


3. If you write down something that is wrong, simply draw a line through it. Do not use Tipp-Ex or cross it out. Each attempt is marked and the highest of the marks gained in the various attempts is used for the final mark awarded.


4. Make sure to learn the ‘Rules of Indices’ for use in Algebra. They are not in the maths tables but they are on page 53 and page 57 of Revise Wise Maths Leaving Certificate Ordinary Level Book 1: Paper 1.


5. The quadratic formula x = -b= +/- the square root of b squared – 4ac over 2a is very useful in both algebra and complex numbers see page 37, 38, 78 and 82 of Revise Wise Maths Leaving Certificate Ordinary Level Book 1: Paper 1.


6. Remember to use math’s tables when attempting the questions on calculus. The basic rule of differentiation is on page 41 and the ‘Product Rule’ and ‘Quotient Rule’ are on page 42. See pages 110 to 115 of Revise Wise Maths Leaving Certificate Ordinary Level Book 1: Paper 1.


7. Use graph paper for the function question. You may need to read answers from your cubic graph, quadratic graph, reciprocal graph or linear graph and this can only be done with reasonable accuracy if using graph paper. See pages 137 – 142 of Revise Wise Maths Leaving Certificate Ordinary Level Book 1: Paper 1 for further information.

Checking if the AT Commands Required for Sending, Receiving and Reading SMS Messages are Supported

The next thing to do is to check if the AT commands required for sending, receiving and reading SMS messages are supported by the mobile phone or GSM/GPRS modem. As pointed out earlier in this SMS tutorial, you can check if a certain AT command is supported by performing a test operation. Simply execute an AT command with "=?" attached at its end. For example, "AT+CMGS=?".

Before we begin the check, let's go through an overview of the AT commands that are required for sending, receiving and reading SMS messages. You will learn which AT commands should be checked and get a general idea about when these AT commands should be used.

Overview of the AT Commands Required

For Sending SMS Messages

To send SMS messages via AT commands, the GSM/GPRS modem or mobile phone has to support either +CMGS (command name in text: Send Message) or +CMSS (command name in text: Send Message from Storage). You may also find +CMGW (command name in text: Write Message to Memory) and +CMGD (command name in text: Delete Message) useful, since they are sometimes used together with +CMSS. +CMSS is used to send an SMS message located in the message storage area. If an SMS message does not exist in the message storage area, you must first use the AT command +CMGW to write the SMS message to the message storage area before you can use the AT command +CMSS to send the SMS message to the SMSC. After message submission, you may use the AT command +CMGD to delete the SMS message to free some space from the message storage area.

For Receiving and Reading SMS Messages

To receive and read SMS messages via AT commands, the GSM/GPRS modem or mobile phone has to support the AT command +CNMI (command name in text: New Message Indications to TE. TE stands for Terminal Equipment, which is the equipment that controls the GSM/GPRS modem or mobile phone. For example, a PC / computer), +CMGL (command name in text: List Messages), or +CMGR (command name in text: Read Messages).

The AT command +CNMI is used to specify how newly arrived SMS messages should be handled. You can tell the GSM/GPRS modem or mobile phone either to forward newly arrived SMS messages directly to the PC, or to save them in message storage and then notify the PC about their locations in message storage.

The AT command +CMGL is used to read all SMS messages that have a certain status (e.g. "received unread", "received read", etc) from the message storage area, while the AT command +CMGR is used to read the SMS message saved at a certain location of the message storage area.

Beginning the Check

Now that you've learned the AT commands required for outbound and inbound SMS messaging are +CMGS, +CMSS, +CNMI, +CMGL and +CMGR. You can begin the check by performing a test operation with each of the AT commands. For example, you can execute the command line "AT+CMGS=?" to check whether +CMGS is supported, like this:

AT+CMGS=?

OK

The final result code "OK" indicates the AT command +CMGS is supported. If the GSM/GPRS modem or mobile phone returns the final result code "ERROR", it means the command is not supported.

A quicker way is to copy and paste the following command line to the terminal program and execute it:

AT+CMGS=?;+CMSS=?;+CNMI=?;+CMGL=?;+CMGR=?

As an example, here shows the response returned from my Nokia 6021 to HyperTerminal after the execution of above command line:

AT+CMGS=?;+CMSS=?;+CNMI=?;+CMGL=?;+CMGR=?

+CNMI: (0-2),(0-3),(0,2,3),(0-2),(0,1)

+CMGL: (0-4)

OK

The return of the final result code "OK" indicates all AT commands under test are supported. If the final result code "ERROR" is returned, it means one or more AT commands are not supported.